-250x250w.jpg "100pcs 10 Types Car Remote Control Touch Push Button Micro Switch")
-25 %
Stepper Motor With ULN2003 Driver Board
| General | |
| Applications | 3D printers, CNC machines, robotic arms |
| Color | Green (driver board), Silver (stepper motor) |
| Compatibility with shields | Arduino CNC shield, Raspberry Pi CNC shield, etc. |
| Compatible motor types | 5-wire, 4-phase stepper motors |
| Compatible Software | GRBL, Marlin |
| Compatible with | Arduino, Raspberry Pi |
| Control interface | 5-wire interface |
| Dielectric strength | 500V AC for one minute |
| Dimensions | Driver board: 40mm x 27mm, Stepper motor: Nema 17 size |
| Drive mode | Half-step, full-step |
| Driver board chip | ULN2003APG |
| Driver board input voltage range | 7V to 15V |
| Driver board output voltage | 10.5V to 12V |
| Driver board voltage regulator | LM317T for stable performance |
| Driver IC | ULN2003 Darlington Array IC |
| Input signal levels | 5V TTL compatible |
| Insulation resistance | 100M ohms min. at 500V DC |
| Maximum current per phase | 500mA |
| Maximum output current | 1.9A per channel (ULN2003 chip) |
| Maximum pull out pulse frequency | 15 KHz |
| Maximum torque | 3.2 kg-cm |
| Minimum pulling pulse | 500μs |
| Model | ULN2003 |
| Motor wire length | 30cm |
| Mounting Holes | 4 holes on driver board for easy installation |
| Number of phases | 4 |
| Number of pins | 16 |
| Operating Temperature | -20°C to 85°C |
| Operating voltage | 5V |
| Package Dimensions | 100mm x 80mm x 30mm |
| Package Includes | 1 x ULN2003 driver board, 1 x stepper motor |
| Package Weight | 100g |
| Protection features | Thermal shutdown, over current protection |
| Recommended power supply | DC 12V, 2A |
| Recommended software for advanced users | Repetier-Host, Pronterface |
| Recommended software for beginners | Arduino IDE |
| Safety features | Over-temperature protection, short circuit protection |
| Step angle | 5.625 degrees |
| Step size options | 1/2 step, 1/4 step, 1/8 step, 1/16 step |
| Weight | Driver board: 12g, Stepper motor: 350g |
| Wiring instructions | Color-coded wires for easy setup |
| Style | |
| Material | Driver board: PCB, Stepper motor: Metal |
| Type | Stepper motor with driver board |
900.00DA
1,200.00DA
Price in reward points: 1200
The Stepper Motor with ULN2003 Driver Board is a reliable and versatile motor and driver combination that is commonly used in various electronic projects. The ULN2003 driver board is designed to easily interface with microcontrollers such as Arduino and Raspberry Pi, making it ideal for robotics, CNC machines, 3D printers, and other projects that require precise control of the motor. This stepper motor can be controlled in both directions, with a step angle of 5.625 degrees. With its compact size and high torque output, this motor is perfect for hobbyists and professionals alike.
-250x250.jpg "MQ-4 Methane Gas Sensor Natural Coal Co Methane Detector Module for Arduino")
-250x250.jpg "MQ-4 Methane Gas Sensor Natural Coal Co Methane Detector Module for Arduino")
-250x250.jpg "100pcs 10 Types Car Remote Control Touch Push Button Micro Switch")
